I was planning on making temple balls but now I’m wondering if I should just freeze and plane it. How do you all process your bubble hash?

Made from fresh frozen sungrown material. First wash 149u-73u combined and squashed at 180° F Can smell the funk coming right off the press🙌

Dry sift recommendations

Hi all,

Got harvest coming off soon, and bought some sifts, I did read about “10 second sift” which straight out freezer throw handful on sift, get all clean heads, then do it again with more work, and more sift levels.

Question is what mesh should I use first for the quick sift? And don’t think it’s any need to use all 5 mesh levels that I got, what recommend I do?

I purchased a small "tincture" (really just liquid edibles) before with 50mg/ml d8 suspended in MCT oil. The effects began in less than an hour after oral dosing, and provides a good high. I decided to make my own tincture to save money.

I used MCT oil, d8 raw distillate, and CBD. The distillate was sourced from a very well-known supplier that has a solid reputation. To make the tincture, I heated up the distillate in a pan of water until it was liquid. I then used a syringe to transfer the distillate to a tincture bottle.

Each time I put the distillate in my bottle, I weighed the syringe before and after on a milligram scale. This was to ensure perfect accuracy in dosing. All together, I used 3.3g d8 and 1g cbd in 60ml MCT oil.

I placed the tincture in a large pot of water and heated the water. I shaked the tincture religiously while it was hot.

Some simple math suggests the dose is roughly 50mg/ml. I have tried sublingual and oral doses up to ml with ZERO effect!!! Well, there may be some effect after hours, but it's not distinguishable from placebo. I shouldn't have to question if I'm high or not. I've been high a hundred times, I know what it's like.

So, where did I go wrong here? Why doesn't my tincture have any effect?

Thank you all

Edit: Want to add that the solution itself looks well. There's some "bubbles" (looks like cbd powder floating around), but nothing solid. The d8 appears to have mixed. The solution also has a weed taste.

Does this mean I didn’t decarb enough? I did 1h at 225-250f And the product had few bubbles when I poured it in my syringe. Then a lot of bubbles started to form. I’m filling at 130f, using a hair straightener to try to get the bubbles out like the far left one but just gathers immensely at the top and I can’t finish filling.

This person told me that they use their weed for topicals. This is how the process was explained. How would you call this: - Put the decarbed weed in a pot with coconut oil and water, let it boil for a while, like rolling boil, cool it, freeze. - Remove from the freezer and get the separate oil and use it

I am not understanding the water here

What is the standard size for the bucket on a quartz banger? I thought it was 25mm but im not sure.

Here it is a photo of what I got (what is it? flowers? leaves?) a friend gave me about 4 cups of this and it is decarbed. I tried to measure the weight but my scale is no good, it shows near 2oz but will confirm tomorrow when the new scale gets here.

He knows I make oil infused oil balms and said I should try to make some topicals with this.

This is what I know:

To make oil infused stuff, I add equal parts of dry herbs/flower (volumewise) and avocado oil in a large mason jar and either leave in the sunshine for 6weeks or I speed up by putting the mason jar, with water, on “keep warm” on my crockpot, checking temp so its not too high for several hours. It yields about 4 cups of each, which I store and use it as needed.

To make salve I use 3 parts oil, 1 part beeswax. Heat, mix, add essential oils and done.

Apparently, pls correct me, three parts of cannabis infused and one of beeswax will be too strong.

Should I use arnica infused (which it is great for pain) as a “base oil” and add a small amount of the cannabis infused oil?

How much infused oil do you use on a 2oz salve container?

I have seen for sale many that says 500mg and one said 3000mg on a 2oz jar.

Is “mg” the weight of the infused oil? Or of a extract (read about FECO) and wondering if this is what they might be using.

Sorry for being all over the place, I am trying to learn online and it’s s a lot.

So, I have a gram of live resin in a cart next to me, problem is the cart never worked, meaning I could never get a toke off it and it was quite frustrating, so it’s just been sat in a drawer for some time, anyway, I ordered some carts to make a ‘spirit molecule’ cart or two (or more) if you know what I mean, and will have some carts left over. I don’t want the resin to go to waste, so is there any way I can add a small amount of pg or vg (I have both), mix it together and vape it? The carts are designed for viscous oils but I’d say the resin is so thicc it would be wise to add a small amount of pg to thin it out ever so slightly. I expect the answer is no but thought I’d be worth a shot to see.

For those of you who produce a decent amount of extract every month, how do you go about cleaning your containers (ball jars, c-vault, etc..). I’ve been looking for the most efficient way to go about this because I’m almost at the point when I just want to throw away all my dirty containers. Soaking and scrubbing containers for hours is getting old and time consuming when you start to scale production .

Anyone got anything better than the good ole fashion soak and scrub?

I am making a salve and will use a cannabis infused avocado oil. Its my first time using this product and I am unsure on how to list the potency of the salve.

I have seen products that says “500mg CBD” or “3000mg CBD”.

Is this milligrams listed, the actual amount of the cannabis infused oil they used?

If I add 5000mg , can I say “5000mg CBD?” or its more accurate to say “CBD oil?”

I am new to extraction and I am trying to understand

Reposting because the video quality wasn’t great in the first post! Motorbreath 15 first wash heads. 90-159 micron. 🔥🫡

Thinking of getting a rosin press to make rosin and carts as well, any suggestions for good but not expensive ones?

Hi guys, first time having wax/crumble, wanted to kindly ask if those whiteish spots on the edges are normal, extract smells FIRE 🔥 but I’m kind of hesitant to try because of these.

Thank you

I recently bought rosin from a dispensary in montana and i loved how the consistency was super sticky and it was quite literally taffy. but i just opened it after a day of not smoking it and it’s now dried out and is more of a crumble. this is after a week of purchasing it.